• <fc #ff0000>Do not shut off the frame.</fc>

The frame is almost never shut off (main reasons would be maintenance or moving).

• <fc #ff0000>Shut off the chamber controller and unplug the chamber.</fc>

The chamber controller should be shut off and the chamber unplugged at the end of the day.

• If you did a test in temperature:

Dry the inside of the chamber

Leave the door of the chamber open for a while (15 min) to avoid moisture.

Remove the grips and DRY them with a rug.

Put them on a rug on a table. It will take roughly an hour for the grips and pull rods to return to ambient temperature if they were below -50C.