==== Load Cell ====
Two load cells are available for the MTS, with maximum load of 500 N and 5 kN.
  * Model 661.11 series 661.11B-10
Capacity 500N

Repeatability 0.02% of full scale
  * Model 661.19 series 661.19F-05
Capacity 5kN

Repeatability 0.03% of full scale
==== Grips ====
   * Roller Action Tensile Grips Bionix 187-003
Capacity 5kN – part number 100-184-842

Max specimen thickness 7 mm

Max specimen width 75 mm

Temperature range -130° to 250° C

  * Compression Platens Fundamental MTS 270-008
Capacity 30kN  - part number 100-182-229

Temperature Range: -130° to 150° C

Min specimen diameter 10mm (recommended)

Max specimen diameter 50mm

   * Advantage Screw Action Tensile grips
Capacity 5kN – part number 055-426-901

Max specimen thickness 25mm

Max specimen width 75mm

With two grip faces, either smooth or corrugated

Temperature range -129 to 200C

==== Environmental Chamber ====
^ Heading 1      ^ Heading 2       ^ Heading 3          ^
| Temperature range    | -129 to +315C     | -200 to 600 F        |
| Internal height x width x depth    | 660 x 356 x 432 mm    | 	26 x 14 x 17 in |
| Weight    | Approx. 68 kg     | Approx. 150 lbs.        |

  * Controller Eurotherm 2404: detailed manual on how to control the chamber is available on the wiki and in the lab.  
  * Roller mounting: the chamber can be removed by pushing it back on the rails - see description in MTS chamber manual - in order to test at room temperature and use the full crosshead travel length.
  * **CAREFUL** the chamber needs a 30 Amp power supply.